C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Head Rest: Removal and Replacement
Driver or Passenger Seat Head Restraint Retainer Replacement
Driver or Passenger Seat Head Restraint Retainer Replacement
Removal Procedure
1. Slide up the seat back trim cover in order to gain access to the rear cardboard panel fasteners. Refer to Driver or Passenger Seat Back Cushion
Cover and Pad Replacement (See: Seat Cover/Service and Repair/Removal and Replacement/Driver or Passenger Seat Back Cushion Cover and
Pad Replacement).
2. Remove the panel fasteners. Pull back the panel in order to gain access to the bushings.
3. Remove the head restraint retainers from the seat back frame by squeezing the retaining tabs together at the base of the guide(s) and lifting up.
Installation Procedure
1. Install the head restraint retainers by pressing into the seat back frame until the retaining tabs snap into place at the bottom of the frame opening.
