C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Seat Cover: Procedures
Front
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. If equipped with side air bags, disable the air bag module. Refer to Disabling the SIR System in SIR.
2. Remove the head restraint.
3. Remove the seat trim panel.
4. Remove the outboard seat belt anchor nut. Pull the seat belt through the seat cushion.
5. Disengage the J-strip retainer on the bottom of the seat back cover.
6. Disconnect the heater seat element connector, if equipped.
7. Using a side motion, carefully lift the seat back cover partially off the foam pad in order to access the arm rest clip.
