C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
8. Connect the lumbar cable to the underside of the seat cushion (6). Connect the lumbar wire harness (if equipped with power lumbar).
9. Connect the electrical connectors.
NOTE: Refer to Fastener Notice in Service Precautions.
10. Install the front nuts (2) onto the studs on the underside of the cushion.
Tighten
Tighten the nuts to 21 N.m (15 lb ft).
11. Feed the seat belt through the seat cushion.
