gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Procedures|Page 14389 > < Procedures|Page 14387
Page 1
background image

Seat Heater Switch: Removal and Replacement

Front Seat Heater Switch Replacement

Front Seat Heater Switch Replacement

Removal Procedure

1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement. See: Doors, Hood and Trunk/Doors/Front Door/Front Door

Panel/Service and Repair

2. Disconnect the electrical connector.

3. Release the retaining clips for the front seat heater switch in order to remove the switch.
4. Remove the front seat heater switch.

Installation Procedure

1. Install the front seat heater switch to the front trim panel by pressing the switch into place until the switch is completely seated.
2. Connect the electrical connector to the front seat heater switch.
3. Install the front trim panel. Refer to Front Side Door Trim Panel Replacement. See: Doors, Hood and Trunk/Doors/Front Door/Front Door

Panel/Service and Repair

Rear Seat Heater Switch Replacement

Rear Seat Heater Switch Replacement

Removal Procedure

1. Remove the center console end panel. Refer to Center Console End Panel Replacement   (See: Interior Moulding / Trim/Console/Service and

Repair/Center Console End Panel Replacement) in Instrument Panel, Gages, and Console.

Procedures|Page 14389 > < Procedures|Page 14387