C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
2. Disconnect the electrical connector.
3. Remove the seat heater switch retaining screws.
4. Remove the switch from the vehicle.
Installation Procedure
1. Install the switch to the console panel.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) in Cautions and Notices.
2. Install the retaining screw.
Tighten the screws to 1.6 Nm (14 lb in).
3. Connect the electrical connector.
4. Install the center console end panel. Refer to Center Console End Panel Replacement (See: Interior Moulding / Trim/Console/Service and
Repair/Center Console End Panel Replacement) in Instrument Panel, Gages, and Console.