C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Open the door.
2. Remove the sill plate.
3. Remove the hinge pillar trim panel.
4. Remove the windshield pillar molding.
5. Remove the weatherstrip from the rear side door opening. Pull the unit away from channel, separating the weatherstrip from the pinchweld flange.
INSTALLATION PROCEDURE
1. Install the weatherstrip from the rear side door opening fully seating the weatherstrip into the channel.
2. Install the windshield pillar molding.
3. Install the hinge pillar trim panel.
4. Install the sill plate.
5. Check door closing effort and seal to door fit.
Auxiliary Weatherstrip Replacement
Auxiliary Weatherstrip Replacement
Removal Procedure
1. Open the door.
