C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Install the cable taking care to correctly route the cable through the guides and the body mounts.
2. Install the cable to the backing plate by pressing the cable into place until locking tabs snap into place, 15 series utilities.
3. Attach the cable to the lever.
4. Install the cable taking care to correctly route the cable through the guides and the body mounts.
5. Install the cable to the backing plate by pressing the cable into place until locking tabs snap into place, all except 15 series utilities.
6. Attach the cable to the lever.
7. Install the cable to the track bar and secure with the clips. Verify that the clips are installed between the locators on the track bar, 15 series utilities.
8. Install the cable to the right and left side guides.
