C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
4. Install the park brake cable to the differential clip.
5. Install the park brake cable bolt to the rear axle clip.
Tighten the park brake cable bolt to 25 Nm (18 ft. lbs.).
6. Install the park brake cable taking care to correctly route the cable though the guides and the body mounts.
7. Install the park brake cable into the mounting bracket until the locking tabs snap into place.
8. Install the park brake cable to the equalizer bar.
9. Remove the safety stands.
10. Lower the vehicle.
Park Brake Cable Guide Replacement
Park Brake Cable Guide Replacement
Removal Procedure
1. Release the parking brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
