C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
6. Install the hose and clamp to the turbocharger outlet coolant pipe to thermostat bypass pipe.
7. Install the bolt retaining the turbocharger outlet coolant pipe to the pipe bracket.
-
Tighten the turbocharger outlet coolant pipe bracket bolt to 21 Nm (15 ft. lbs.).
8. Install a new O-ring seal to the heater pipe.
9. Install the heater pipe to the thermostat housing.
10. Install the bolt retaining the heater pipe to the thermostat housing.
-
Tighten the heater pipe bolt to 21 Nm (15 ft. lbs.).
11. Install the bolt retaining the heater pipe to the fuel filter assembly.
-
Tighten the heater pipe bracket bolt to 21 Nm (15 ft. lbs.).
12. Connect the inlet heater hose to the heater inlet.
13. Install the fuel injection control module wiring harness conduit to the heater pipe.