C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
12. Remove the nut retaining the generator positive cable to the generator.
13. Remove the positive cable from the generator.
14. Remove the clip holding the positive cable to the engine front cover.
15. Remove the bolt retaining the battery positive cable junction block to the power steering pump.
16. Move the generator positive cable and the junction block bracket aside.
17. Disconnect the generator electrical connector.
18. Disconnect the engine coolant temperature (ECT) sensor electrical connector.
19. Remove the power steering pump mounting bracket and secure to the side.
-
Do not remove the power steering pump from the bracket.
-
The hoses and battery cables can remain on the power steering pump.
20. Remove the bolts retaining the fuel bleed valve and PCV oil separator bracket from the generator mounting bracket.
