C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Water Pump: Service and Repair
Water Pump Replacement
Removal Procedure
1. Remove the left front fender wheelhouse inner panel (1).
2. Drain the engine coolant and the engine block.
3. Remove the thermostat housing crossover.
4. Remove the fan clutch.
5. Remove the Crankshaft balancer.
6. Remove the water pump outlet pipe to water pump nuts.
7. Remove the engine wiring harness retainer from the inner stud.
8. Remove the water pump bolts. Note the location of the bolts. The bolts are three different lengths.