C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
6. Install the camshaft reluctor to the camshaft gear.
7. Install the camshaft reluctor bolts.
-
Tighten the bolts in a cross-bolt pattern to 9 Nm (80 inch lbs.).
8. Reinstall the J44643 in the starter opening, if removed.
9. Install the NEW camshaft gear bolt.
-
Tighten the camshaft gear bolt to 234 Nm (173 ft. lbs.).
10. Using the ~J 26900-12 (1) and the J 26900-13 (2) measure the camshaft end play.
-
The production value is 0.050 - 0.114 mm (0.002 - 0.0045 inch) and service limit is 0.20 mm (0.008 inch).
-
Replace the camshaft gear or the camshaft thrust plate if measured value exceeds the service limit.
