C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
17. Remove the engine mount.
Installation Procedure
1. Position the engine mount frame bracket on the frame. Do not install the bolts.
2. Install the engine mount.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 2 through-bolts.
-
Tighten the through-bolts to 75 Nm (55 ft. lbs.).
4. Install the bolts holding the engine mount to the engine.
-
Tighten the engine mount bolts to 58 Nm (43 ft. lbs.).
5. Lower the engine.
6. If 4WD vehicle remove the chain from the front of the engine.
7. If 4WD vehicle, install the generator mounting bracket and the power steering mount bracket bolt.
-
Tighten the mounting bracket bolts to 50 Nm (37 ft. lbs.).
