C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the intake air heater, if removed.
-
Tighten the intake heater to 50 Nm (37 ft. lbs.).
2. Install the intake manifold tube with NEW gaskets.
3. Install the intake manifold tube bolts and nuts.
-
Tighten the bolts and nuts to 10 Nm (89 inch lbs.) in the numerical order.
4. Install the following fuel pipes and wiring harnesses:
-
The main fuel pipes.
-
The fuel junction block.
-
The fuel hoses to the FICM and the FICM wiring harness.
-
The fuel pipes to the left fuel rail.
5. Install the intake air heater terminal and nut.
-
Tighten the terminal nut to 4 Nm (35 inch lbs.).
