C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Timing Cover: Service and Repair
Engine Front Cover Replacement
-
Tools Required
-
J 37228 Seal Cutter
Removal Procedure
1. Loosen the outlet duct clamp at the upper intake manifold cover.
2. Remove the upper intake manifold cover from the outlet duct.
3. Remove the upper intake manifold cover.
4. Disconnect the battery negative cable.
5. Drain the engine coolant and the engine block.
6. Remove the right front fender wheelhouse panel.
7. Remove the upper fan shroud.
8. Remove the fan clutch.
9. Remove the drive belt.
10. Remove the oil fill tube.
11. Remove the thermostat housing crossover.
12. Remove the crankshaft balancer.
13. Remove the crankshaft front oil seal.
14. Remove the water pump.
15. Disconnect the camshaft sensor electrical connector.
16. Remove the camshaft sensor bolt and sensor.
