C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Left Exhaust Manifold Tightening Sequence
3. Use the sequence shown, to properly tighten the exhaust manifold bolts.
3.1.
Tighten the exhaust manifold bolts/nut a first pass to 34 Nm (25 ft. lbs.).
3.2.
Tighten the exhaust manifold bolts/nuts a final pass to 34 Nm (25 ft. lbs.).
4. Install the exhaust manifold heat shield.
5. Install the exhaust manifold heat shield bolts.
-
Tighten the exhaust manifold heat shield bolts to 8 Nm (71 inch lbs.).
6. Install the exhaust pipe gasket. Align the tab on the gasket to face outward.
7. Install the exhaust pipe and the bolts (2) to the exhaust manifold.
-
Tighten the exhaust pipe to exhaust manifold bolts to 53 Nm (39 ft. lbs.).