C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Install the right exhaust pipe with a NEW gasket to the turbocharger. Align the tab on the gasket to face inward.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the exhaust pipe to turbocharger bolts (2).
-
Tighten the exhaust pipe to turbocharger bolts to 53 Nm (39 ft. lbs.).
3. Install the exhaust pipe to the exhaust manifold with a NEW gasket. Align the tab on the gasket to face outward.
4. Install the exhaust pipe to exhaust manifold bolts (1).
-
Tighten the exhaust pipe to exhaust manifold bolts to 53 Nm (39 ft. lbs.).
5. Install the EGR cooler tube nuts, to the studs (1).
-
Tighten the EGR cooler tube nuts to 30 Nm (22 ft. lbs.).
6. Install the turbocharger exhaust pipe outlet.