gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Technical Service Bulletins for Accumulator HVAC: > < A/C - Doesn't Blow Cold Enough|Page 11687
Page 3
background image

23.

Install the suction hose nut to the accumulator.

Tighten

Tighten the nut to 16 N.m (12 lb ft).

24.

Connect the electrical connector to the A/C low pressure switch.

25.

Install the new suction hose to the compressor.

26.

Install the suction hose mounting bolt to the A/C compressor.

Tighten

Tighten the bolt to 16 N.m (12 lb ft).

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

All Technical Service Bulletins for Accumulator HVAC: > < A/C - Doesn't Blow Cold Enough|Page 11687