C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Install the filter attachment tube (1).
Notice: Refer to Fastener Notice in Service Precautions.
^
Tighten the attachment tube to 30 Nm (22 ft. lbs.).
2. Reinstall the magnet (2) onto the filter attachment tube (1).
3. Lubricate the gasket (3) on the control main filter with transmission fluid.
4. Install, by hand, the control main filter (4) until the gasket on the control main filter touches the converter housing.
Notice: Turning the control-main filter more than ONE FULL TURN after gasket contact will damage the filter and may cause fluid leakage.
5. Turn the filter ONE FULL TURN ONLY after gasket contact.
Notice: Use only clean and approved transmission fluid.
6. Check the transmission fluid level.
