C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Tighten
Tighten the A/C compressor mounting bolts to 50 N.m (37 lb ft).
11.2. Reconnect the A/C cut out switch electrical connector.
11.3. Reconnect the A/C compressor clutch electrical connector.
12. Replace the drive belt.
13. Fill the engine coolant. Refer to Draining and Filling Cooling System in Cooling System.
14. Install the upper intake manifold cover.
15. Install the upper intake manifold cover to the outlet duct.
16. Tighten the outlet duct clamp at the upper intake manifold cover.
Tighten
Tighten the clamp to 6 N.m (53 lb in).
17. Install the fuel cap.
18. Connect the negative batteries cables to both batteries.
19. Position the hood in the normal operating position by moving the hood hinge bolts from service position (2) to normal operating position (1).
Tighten
Tighten the bolts to 25 N.m (18 lb ft).
20. Purge air from the fuel system. Refer to Fuel Feed and Fuel Return Pipe Purge Procedure.
