C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
10. Remove the engine electrical center bracket assembly from the fender.
INSTALLATION PROCEDURE
1. Install the engine electrical center bracket assembly to the front fender.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the 4 retaining bolts (1).
Tighten
Tighten the 4 retaining bolts (1) to 9 N.m (80 lb in).
3. Align the electrical center block (1) stubs in the slots so that the tabs (2) retains it in place.
