C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
8. Loosen both of the charged air cooler outlet duct to intake hose clamps.
Important: Do not use a screwdriver or other tool to pry the hose loose. The hose can be torn or damage. Loosen the hose by twisting.
9. Remove the charged air cooler duct to intake hose.
10. Remove the nut retaining the positive cable to the generator.
11. Remove the positive cable from the generator.
12. Disconnect the generator electrical connector.
13. Remove the ribbed idler pulley from the generator bracket.
14. Remove the generator mounting bracket and secure to the side.
-
The generator does not require removal.
-
The drive belt tensioner does not require removal.
15. Disconnect the wiring harness connector to the fuel injection control module.
16. Remove the fuel lines to the fuel injection control module.
