C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
7. Remove the nut at the condenser.
Discard the nut.
8. Disconnect the A/C compressor hose from the condenser.
9. Disconnect the A/C recirculation switch from the A/C compressor hose assembly.
10. Remove the A/C compressor hose assembly from the vehicle.
11. Discard all of the used sealing washers. Cap the system openings.
INSTALLATION PROCEDURE
1. Install the A/C compressor hose assembly to the vehicle.
2. Connect the A/C recirculation switch to the A/C compressor hose assembly.
3. Connect the A/C compressor hose to the condenser using new sealing washers.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the NEW nut to the condenser.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
5. Install the upper radiator baffle.Refer to Radiator Air Baffle Assemblies and Deflectors (Side) or Radiator Air Baffle Assemblies and Deflectors
(Upper) in Cooling System.
