gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

A/C - Doesn't Blow Cold Enough|Page 5697 > < A/C - Doesn't Blow Cold Enough|Page 5695
Page 3
background image

23.

Install the suction hose nut to the accumulator.

Tighten

Tighten the nut to 16 N.m (12 lb ft).

24.

Connect the electrical connector to the A/C low pressure switch.

25.

Install the new suction hose to the compressor.

26.

Install the suction hose mounting bolt to the A/C compressor.

Tighten

Tighten the bolt to 16 N.m (12 lb ft).

Parts Information

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

A/C - Doesn't Blow Cold Enough|Page 5697 > < A/C - Doesn't Blow Cold Enough|Page 5695