C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Important: The outlet duct must be fully seated against the positive stop feature on the turbocharger inlet.
10. Install the outlet duct to the turbocharger.
11. Align the outlet duct alignment indicator (1) to the turbocharger alignment indicator (2).
Important: The outlet duct must be fully seated against the MAF/IAT sensor with the edge of the seal in the vertical position.
12. Install the outlet duct to the MAF/IAT sensor.
13. Tighten the outlet duct clamps at the turbocharger and the MAF/IAT sensor.
-
Tighten the clamps to 6 Nm (53 inch lbs.).
