C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
3. Install the 3 fuel pressure regulator screws (1) using a T25 TORX.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
-
Tighten the screws a first pass to 4 Nm (35 lb in).
-
Tighten the screws a final pass to 7 Nm (62 lb in).
4. Install the injection pump inlet hose to the fuel feed distribution (leak) block.
5. Position the injection pump inlet clamp.
