C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
8. Install the engine wiring harness assembly.
9. Install the left turbo charged air outlet hose.
10. Install the right turbo charged air outlet hose.
11. Install the air cleaner outlet duct.
12. Connect the negative battery cable.
13. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
Fuel Rail Pressure (Frp) Sensor Replacement
REMOVAL PROCEDURE
1. Remove the air conditioning (A/C) compressor.
2. Disconnect the fuel rail sensor (1) electrical connector.
3. Remove the sensor and metal gasket from the junction block. Discard the gasket.
INSTALLATION PROCEDURE
