C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Shift Interlock Solenoid: Service and Repair
Automatic Transmission Shift Lock Actuator Replacement
Removal Procedure
Caution: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system.
2. Remove the body control module bracket.
3. Put the shift lever clevis into the neutral position.
4. Disconnect the electrical connector.
5. Use a small screwdriver to pry the automatic transmission shift lock control actuator away from the steering column jacket assembly and the cable
shift cam assembly.
6. Remove the automatic transmission shift lock control actuator.
Installation Procedure
1. Firmly install the automatic transmission shift lock control actuator onto the steering column jacket assembly and the cable shift cam assembly.
2. Connect the electrical connector.
3. Adjust the automatic transmission shift lock control actuator (with the shift lever clevis in the neutral position) in the following way:
