C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
33. Place a power source, 12 V minimum/2 A minimum, i.e., a vehicle battery, near the shorted ends of the passenger side deployment hamesses.
34. Separate the 2 ends of the IP module deployment harness wires.
35. Connect the IP module deployment harness wires to the power source in order to deploy the IP module.
36. Disconnect the P module deployment harness wires from the power source.
37. Twist together 1 end of each wire of the IP module on the passenger side deployment harness in order to short the wires.
38. Move the power source, 12 V minimum/2 A minimum, i.e., a vehicle battery, near the shorted ends of the driver side deployment harnesses.
39. Separate the 2 ends of the steering wheel module deployment harness wires.
40. Connect the steering wheel module deployment harness wires to the power source in order to deploy the steering wheel module.
41. Disconnect the steering wheel module deployment harness wires from the power source.
