C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
free space for the bag to expand in the unlikely event of accidental deployment.
Never rest the steering column assembly on the steering wheel with the inflator module face down, and the column vertical. This may result in
personal injury.
12. Remove the inflator module.
13. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required
retention period. Refer to Inflator Module Handling and Scrapping.
INSTALLATION PROCEDURE
CAUTION: When carrying a live inflator module, make sure the bag opening is pointed away from you. This minimizes the chance of injury
in the case of an accidental deployment. Never carry the inflator module by the wires. Never carry the inflator module by the connector on
the underside of the module.
Make sure that the bag and trim cover are facing up whenever you place a live inflator module on any surface. This is necessary to provide a
free space for the bag to expand in the unlikely event of accidental deployment.
Never rest the steering column assembly on the steering wheel with the inflator module face down, and the column vertical. This may result
in personal injury.
1. Connect the SIR connector.
2. Connect the connector position assurance (CPA) retainer to the SIR connector.
3. Install the SIR lead wire to the clip on the steering wheel.
IMPORTANT: Verify that the wiring is not exposed or trapped between the inflatable restraint steering wheel module and the steering wheel.
4. Install the SIR lead wire to the clip on the inflator module.
5. Press the inflator module into the steering wheel firmly enough that the module engages and latches the notched pins in the leaf springs.
6. Rotate the steering wheel back into the straight position.
7. Enable the SIR system.
