gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Battery Cable Replacement (Negative)|Page 10105 > < Battery Cable Replacement (Negative)|Page 10103

C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)

Page 3
background image

4. Position the negative cable and engine wiring harness ring terminals to the engine block.

Position the anti-rotation tab on the negative cable in the correct location.

5. Install the engine wiring harness ground/negative cable bolt.

Tighten
Tighten the engine wiring harness ground/negative cable bolt to 34 N.m (25 lb ft).

6. Lower the vehicle.
7. Install the negative cable clip to the clip on the positive cable.

8. Connect the negative battery cable.

Battery Cable Replacement (Negative)|Page 10105 > < Battery Cable Replacement (Negative)|Page 10103