C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
6. Remove the generator cable from the generator, perform the following:
6.1. Slide the boot down revealing the terminal stud.
6.2. Remove the generator cable nut from the terminal stud.
6.3. Remove the generator cable.
INSTALLATION PROCEDURE
1. Install the generator cable to the generator, perform the following:
1.1. Install the generator cable.
NOTE: Refer to Fastener Notice in Service Precautions.
1.2. Install the generator cable nut to the terminal stud.
Tighten
Tighten the generator cable nut to 9 N.m (80 lb in).
1.3. Slide the boot over the terminal stud.
