C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Fuse Block: Service and Repair
Fuse Junction Block Replacement
FUEL JUNCTION BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Move the hood to the service position, by moving the hood hinge bolts (1) to the service positions (2).
2. Disconnect the batteries negative cables.
3. Loosen the outlet duct clamp at the upper intake manifold cover.
4. Remove the upper intake manifold cover from the outlet duct.
5. Remove the upper intake manifold cover.
6. Drain the engine coolant. Refer to Draining and Filling Cooling System in Cooling System.
7. Remove the drive belt.