C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
3. Remove the tie rod end clamp (2) from the rack and pinion boot (1).
4. Remove the boot clamp (1) from the rack and pinion boot with side cutters.
5. Discard the boot clamp (1).
Important: If a breather tube is present, mark the location of the breather tube on the gear assembly before removal of the rack and pinion boot.
6. Remove the rack and pinion boot (1) and the breather tube, if present, from the rack and pinion gear assembly.
Assembly Procedure