gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear)|Page 11173 > < Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear)|Page 11171

C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)

Page 24
background image

1. Install the steering gear actuator (2) and gasket (1) to the differential.

Notice:  Refer to Fastener Notice in Service Precautions.

2. Install the steering gear actuator and cover (2) retaining bolts. 

^

Tighten the bolts to 61 Nm (45 ft. lbs.). 

3. Connect the electrical connectors to the control module (2).

Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear)|Page 11173 > < Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear)|Page 11171