C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
4. Install the differential vent hose (1) to the vent tube (2).
5. Install the outer tie rod ends to the steering knuckle.
6. Install the drain plug (2) and fill the differential with fluid.
7. Install the bolts (3) retaining the steering gear protection shield.
^
Tighten the bolts to 180 Nm (132 ft. lbs.).
8. Install the tire and wheel.
9. Lower the vehicle.
10. Perform a four wheel alignment.
Steering Gear Protection Shield Replacement
Steering Gear Protection Shield Replacement
Removal Procedure
Notice: Refer to Rear Wheel Steering Notice in Service Precautions.
