C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Screw the pitman shaft (4) to the side cover (8) until it fully seats to the side cover (8).
2. Install the adjuster lock nut (1). Do not tighten the adjuster lock nut (1) until the pitman shaft adjustment is completed.
3. Install the pitman shaft assembly (4) and the side cover (8) to the steering gear housing (7).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the bolts (2).
^
Tighten the bolts (2) to 60 Nm (45 ft. lbs.).
5. Install the lock washer (2).
6. Install the nut (3).
7. Refer to Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear) to adjust the pitman shaft.
Off Vehicle (670 Gear)
Steering Gear Pitman Shaft and Housing Cover Replacement - Off Vehicle (670 Gear)
Disassembly Procedure
