C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
7. Remove the pitman shaft cover bolts (1) from the pitman shaft and cover assembly (3).
Remove the lash adjuster nut (2) from the pitman shaft and cover assembly (3).
8. Remove the pitman shaft and cover assembly (3).
9. Remove the pitman shaft cover O-ring (4) from the steering gear housing assembly.
Assembly Procedure
1. Install the new pitman shaft cover O-ring (4).
2. Install the pitman shaft and cover assembly (3) onto the steering gear housing assembly.
3. Install the lash adjuster nut (2) onto the pitman shaft and cover assembly (3)
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the pitman shaft cover bolts (1) onto the pitman shaft and cover assembly (3).
^
Tighten the pitman shaft cover bolts to 62 Nm (46 ft. lbs.).
