C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
5. Install the lock washer (2).
6. Install the nut (3).
7. If necessary adjust the pitman shaft. Refer to Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear).
Steering Gear Stub Shaft Seals and Bearing Replacement - Off Vehicle
Steering Gear Stub Shaft Seals and Bearing Replacement - Off Vehicle
^
Tools Required
-
J 29810 Stub Shaft Seal Protector
Disassembly Procedure
1. Remove the adjuster plug lock nut (5) from the adjuster plug (4).
2. Remove the adjuster plug (4) From the gear assembly (1).
3. Remove the adjuster spring (3) and the rack bearing (2).
