C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Fluid Line/Hose: Service and Repair
Allison - Automatic Transmission
Automatic Transmission Oil Cooler Fitting Replacement
Automatic Transmission Oil Cooler Fitting Replacement
Removal Procedure
1. Disconnect the hose from the hydraulic connector assembly being replaced.
2. Remove the hydraulic connector assembly (1) and/or (2).
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install a new hydraulic connector assembly (1) and/or (2)
^
Tighten to 25 Nm (18 ft. lbs.).
2. Connect the hose to the hydraulic connector(s).
Transmission Fluid Cooler Hose/Pipe Replacement
Transmission Fluid Cooler Hose/Pipe Replacement
Removal Procedure
