gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Fluid Pressure Sensor/Switch, A/T > < Fluid Pan, A/T|Specifications|Page 7631
Page 2
background image

7. Install the remainder of the 12 bolts (8) (two will replace the guide bolts).

^

Tighten the bolts to 27 Nm (20 ft. lbs.).

8. Reinstall drain plug (7) and drain plug seal (6).

^

Tighten the drain plug to 35 Nm (26 ft. lbs.).

9. Lower the vehicle.

Notice:  Use only clean and approved transmission fluid.

10. Refill the transmission with DEXRON III Automatic Transmission Fluid. 

Important:  Remember fluid remains in the external circuits and transmission cavities after draining the transmission.

11. Check the transmission fluid level.

Fluid Pressure Sensor/Switch, A/T > < Fluid Pan, A/T|Specifications|Page 7631