C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
20. Push the end of the cable (2) inside the end of cable (1) until the blue spring on cable (2) is fully compressed.
Pushing together the two ends of the cable will engage the inner wire and lock both cable wires together.
Important: This step must be performed correctly to avoid a misadjusted cable.
Do not grasp the cable end (2) during this procedure.
21. Release the cable end (2) and allow the blue spring to tension/adjust the cable system.
22. Pull the white cover (3) on the cable end (1) back.
23. Push the natural colored lock button (2) down to engage the locking teeth on the cable end (1).
