C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Insert the J 43773 (2) into the bore you just removed the above components from. Compress the converter relief valve spring enough to remove the "U"
shaped retaining clip (1) and remove the clip. Then remove the following items.
Transmission damage may occur when springs and other parts are mistakenly interchanged. Proper springs and other part identification is very important.
Position the support assembly so that the converter relief valve/lube regulator bore is facing upward. Then install the following components.
The converter relief valve (1) (big end first, the small end fits into the converter relief spring)
The converter relief spring (2) (Natural steel, no color, free length 44.85 mm (1.766 in))
