C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
6. Ensure that the three retaining ring ears are seen from inside the fitting and that the retaining ring moves freely in the fitting slots.
7. Install the NEW retaining ring (E-clip) into the remaining quick connect fittings.
8. Install the cooler line into the quick connect fitting.
9. Insert the cooler line end into the quick connect fitting until a click is either heard or felt.
10. Do not use the plastic cap on the cooler line in order to install the cooler line into the fitting.
11. Pull back sharply on the cooler line in order to ensure that the cooler line is fastened into the quick connect fitting.
