C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
16. Install the TCC PWM solenoid (1) to the control valve body.
17. Install the TCC PWM solenoid retainer (2).
18. Install the transmission fluid indicator stop bracket (1) and bolt (2).
^
Tighten the transmission fluid indicator stop bracket bolt to 11 Nm (97 inch lbs.).
19. Connect the internal wiring harness electrical connectors to the following components:
^
The transmission fluid pressure manual valve position switch (1)
^
The 1-2 shift solenoid (2)
^
The 2-3 shift solenoid (3)
^
The pressure control solenoid (4)
^
The TCC PWM solenoid (5)
^
The 3-2 shift solenoid (6)
20. Install the transmission oil pan and filter.
21. Lower the vehicle.
22. Fill the transmission to the proper level with DEXRON III transmission fluid.
