C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
3. Install one bolt marked (1) to hold the control valve assembly in place.
Notice: Refer to Fastener Notice in Service Precautions.
4. Reinstall the remaining 14 bolts marked (1) that fasten the control valve assembly to the main housing.
^
Tighten the bolts to 12 Nm (108 inch lbs.).
5. Push the main transmission connector (2) outward through the hole (1) in the main housing until the retaining "feet" on the connector are nearing
the locked position.
6. Use the J 44247 to complete the seating of the retaining "feet" that lock the connector (1) into the main housing.
