C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
Clutch Slave Cylinder: Service and Repair
Concentric Slave Cylinder (ZF S6-650)
Concentric Slave Cylinder (ZF S6-650)
Removal Procedure
1. Remove the manual transmission.
2. Remove the clutch actuator cylinder bolts.
3. Remove the clutch actuator cylinder.
If required, the clutch release bearing can be removed from the clutch actuator cylinder for replacement.
Installation Procedure
1. Install the clutch actuator cylinder.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the clutch actuator cylinder bolts.
^
Tighten the clutch actuator cylinder bolts to 8 Nm (71 inch lbs.).
3. Install the manual transmission.