C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
2. Install the wheel hub and bearing retaining bolts.
^
Tighten the bolts to 180 Nm (132 lb ft).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the wheel drive shaft retaining nut.
^
Tighten the nut to 250 Nm (184 lb ft).
4. Install the retainer (3) and cotter pin (2) to the wheel drive shaft nut.
5. Install the dust cap (4).
6. Install the brake rotor.
7. Install the tire and wheel.
8. Lower the vehicle.
