C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the rear propeller shaft.
3. If required, remove the following:
3.1.
The main shaft nut
3.2.
The prop shaft yoke washer
3.3.
The main shaft washer
3.4.
The yoke
4. Remove the rear seal using J 6125-B (1) and 123129 (2).
Installation Procedure
1. Using J22834-A install the NEW rear oil seal.