gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Door Panel > < Torque Converter - Bolt Design Update|Page 15723
Page 1
background image

Front Door Limiter: Service and Repair

Door Check Link Replacement

Removal Procedure

1. Fully open the door.
2. Remove the body-side check strap bolts.
3. Remove the door-side check strap bolts.
4. Pull the check strap from the inside of the door.

Installation Procedure

1. Align the installation tab.
2. Install the check strap in the door.
3. Install the check strap in the body.

Notice:  Refer to Fastener Notice in Service Precautions.

4. Install the check strap bolts.

Tighten the bolts to 10 N.m (89 lb in).

Front Door Panel > < Torque Converter - Bolt Design Update|Page 15723